Fiberglass Continuous Filament Mat EMS200 Nanjing Tianming:
introduction
Continuous strand mat which is made of continuous fiberglass strand, non woven mat containing an insoluble binder for unsaturated polyester, epoxy, phenolics and polyurethane resin compatibility in unfilled or filled resin systems. Continuous strand mats suit for FRP process, for example pultrusion process, RTM process, filament winding process and the molding process.
The continuous strand mats is widely used in auto interior trimming, such as rear shelf, sun visor and rear tray assembly. It also can be used in insulation materials of transformer, the field of windows and other reinforce material.
Basic Parameters:
Technical Date:
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts(the bottom of engine, GMT, bumper, bonnet insulation pad, dashboard insulation board, frame, headliner, sunroof, coatrack, rear parcel, heat insulation hood, sun visor, rear tray assembly,etc)
• Boats/yachts
• FRP fields(hand lay-up, RTM, filament winding, pultrusion, molding,etc)
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass continuous filament mat. Then the one most suitable for you will be recommended.
Packaging:
• Tied with plastic rope
• Covered with a plastic bag
• Packed in a carton and sticked with label
• Packed by pallet with shrink wrap and shipping mark
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Continuous Filament Mat Series:
Our Services
1. 24 hours online reply(English, Spanish and Chinese) .
2. Other thickness & size also available on request.
4. Your business relationship with us will be confidential to any third party.
5. Good after-sale service offered, please get back if you got question.
introduction
Continuous strand mat which is made of continuous fiberglass strand, non woven mat containing an insoluble binder for unsaturated polyester, epoxy, phenolics and polyurethane resin compatibility in unfilled or filled resin systems. Continuous strand mats suit for FRP process, for example pultrusion process, RTM process, filament winding process and the molding process.
The continuous strand mats is widely used in auto interior trimming, such as rear shelf, sun visor and rear tray assembly. It also can be used in insulation materials of transformer, the field of windows and other reinforce material.
Basic Parameters:
| Model No.: | EMS200 |
| Weight: | 0.66per sq/ft or 200grams per sq/m±8% |
| Width: | up to 85" or up to 2160mm |
| Size of the Inner Carton Tube: | Length 41" * Diameter 3" * Thickness 0.2" or Length 1040mm * Diameter 77m * Thickness 5mm |
Technical Date:
| Loss on Ignition: | 5%±1% |
| Moistrure: | ≤0.2% |
| tension strength: | Intensity in Horizontal ≥ 120N Intensity in Vertical ≥ 120N |
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts(the bottom of engine, GMT, bumper, bonnet insulation pad, dashboard insulation board, frame, headliner, sunroof, coatrack, rear parcel, heat insulation hood, sun visor, rear tray assembly,etc)
• Boats/yachts
• FRP fields(hand lay-up, RTM, filament winding, pultrusion, molding,etc)
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass continuous filament mat. Then the one most suitable for you will be recommended.
Packaging:
• Tied with plastic rope
• Covered with a plastic bag
• Packed in a carton and sticked with label
• Packed by pallet with shrink wrap and shipping mark
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Continuous Filament Mat Series:
| Model No. | Weight | Width | Loss on Ignition | Moistrure | Net Weight per Roll | Use And Craftwork | |||
| (oz. per sq/ft) | (grams per sq/m) | (inch) | (mm) | (%) | (%) | (lb) | (kg) | ||
| EMS-P | 0.98/1.25/1.47 | 300/380/450 | 41-102 | 1040-2600 | 2-8 | ≤0.2 | 66 | 30 | Pultrusion / Winding |
| EMS-R | 0.74/0.98/1.47/2 | 225/300/450/600 | 41-102 | 1040-2600 | 2-5 | ≤0.2 | 66 | 30 | RTM / Automotive Parts |
| EMS-E | 0.98/1.47/2 | 300/450/600 | 41-102 | 1040-2600 | 2-5 | ≤0.2 | 66 | 30 | Insulatin Material / Automotive Parts |
| EMS-M | 0.98/1.25/1.47 | 300/380/450 | 41-102 | 1040-2600 | 2-6 | ≤0.2 | 66 | 30 | Compression Molding |
| EMS-O | 0.98/1.25/1.47 | 300/380/450 | 41-102 | 1040-2600 | 2-5 | ≤0.2 | 66 | 30 | Common Type for RTM Compress Molding And Automotive Parts |
Our Services
1. 24 hours online reply(English, Spanish and Chinese) .
2. Other thickness & size also available on request.
4. Your business relationship with us will be confidential to any third party.
5. Good after-sale service offered, please get back if you got question.